Please select your home edition
Edition
Marina Exchange 728x90 1

Construction updates: Gypsea - Bayliss 62'

by Bayliss Boatworks 7 Jul 2019 14:10 UTC
Gypsea Bayliss 62' © Bayliss Boatworks

The month of June has been an especially busy one for our paint crew. With the cabin installed on Gypsea (Bayliss 62'), our crew turned their attention to glassing, fairing, and priming the engine room companionway, aft fuel tank compartment and anchor locker. With the lazarette deck installed, the exterior carpentry crew completed the build and installation of the fishbox.

Our mechanical department awaits the delivery of her struts, which will arrive within the next week. In the meantime, the crew checked another benchmark off Gypsea's list- the installation of the aft fuel tank.

On Gypsea's flybridge, interior wing walls have been fabricated and glassed in. Our teams are currently reviewing console size and location. Over the course of the next month, the console will begin to take shape.

In the Gypsea's interior, our crew is making a lot of progress. The salon deck has been glassed, air boxes have been built and glassed, head showers have been painted, and now lower level build-out is in full swing.

Read more here

Related Articles

Bayliss 72' Old Reliable construction update
Installation of her cabin checked off Old Reliable (Bayliss 72') had another eventful month. Once her bow deck was planked, she checked off another big benchmark in the build process- the installation of her cabin. Posted today at 3:27 pm
Bayliss 62' Seven construction update
Getting to that point in the build process where benchmarks seem to be flying by Seven (Bayliss 62') is getting to that point in the build process where benchmarks seem to be flying by. In early July, the half-round and toe rail were installed then coated in faux-teak paint, along with the transom. Posted on 3 Aug
Bayliss 75' construction update
Continuing to take shape in the Bayliss Boatworks hull shop Bayliss 75' is continuing to take shape in our hull shop. Once the hull jig was assembled, our crews wasted no time, beginning the steady process of shaping and laminating the bow stem. Posted on 12 Jul
Bayliss 72' Old Reliable construction update
With interior walls secured, installation of her carlings begins Old Reliable (Bayliss 72') had another eventful month. With interior walls secured in June, our crew was able to turn their attention to the installation of her carlings. Next week, bow deck planking will begin. Posted on 10 Jul
Bayliss 62' Seven construction update
The entire mezzanine now faired and ready for primer The month of June was all about fairing and priming on Seven (Bayliss 62'). Over the last month, the cockpit has continued to develop. The overhang ceiling was constructed and the grill center was built. Posted on 9 Jul
Bayliss 27' Center Consoles construction update
Commissioned by the owners of Blank Check (Bayliss 75') Commissioned by the owners of Blank Check (Bayliss 75'), we began building two 27-foot center consoles in the late summer of 2019 and this month, they are ready for delivery! Posted on 7 Jul
Salty Tiger - Bayliss 62' construction update
Set to be delivered this month While it's her custom transom artwork that has garnered the most attention, she also features a teak cockpit deck and coverboards, constructed from hand-selected teak boards. Posted on 6 Jul
Bayliss 75' construction update
The cabin has been coated in adtech and sanded down for fairing At the end of May, the hull jig was constructed. Our hull carpentry crew will now begin shaping the bow stem, closely followed by in the installation of the chine, sheer, and stringers. Posted on 10 Jun
Old Reliable - Bayliss 72' construction update
With walls in place, we see a first glimpse of the lower-level layout The forward area has taken shape- interior walls are up! With walls in place, we are seeing our first live glimpse of the lower-level layout, which will be comprised of four staterooms and three heads. Posted on 8 Jun
Bayliss 62' construction update
'Seven's bow deck, cabin and flybridge transition from fairing to final primer The exterior carpentry crew continues to develop the mezzanine and engine room companionway. Mezzanine stainless refrigerator/freezer liners are nearly ready for installation in the mezzanine and have already been installed on the flybridge. Posted on 6 Jun
Marina Exchange FOOTER 1